IANZ Accreditation No. 1447
Accredited to ISO/IEC 17025:2017 for the specific asbestos testing activities listed in the schedule.
- Issue
- Issue 4
- Date
- 16 March 2026
- Initial accreditation
- 12 October 2023
Access Aerem's published accreditation, certification and policy documents, with plain-language scope boundaries to help you understand what each document covers.
ISO/IEC 17025:2017
Issue 4 · 16 March 2026
Review the certificate, scope and expiry details using the links below. This summary reflects the documents recorded on 30 August 2026; confirm the latest versions with Aerem before relying on them for a project.
Accredited to ISO/IEC 17025:2017 for the specific asbestos testing activities listed in the schedule.
Telarc Registration No. 3229 for Aerem's published consultancy and testing certification scope.
Telarc Registration No. 516 for Aerem's published environmental management-system certification scope.
Telarc Registration No. 812 for Aerem's published health and safety management-system certification scope.
Aerem's IANZ accreditation applies only to the activities listed in its scope. The summary below reflects the linked schedule dated 16 March 2026. Other specialist services are not covered by that laboratory accreditation unless listed in the schedule.
AS 4964:2004 qualitative identification of asbestos in bulk samples. The linked schedule expressly excludes soils.
Air analysis only under NOHSC 3003(2005), using the membrane-filter method for estimating airborne asbestos fibres.
Establishment and operation of mobile laboratories for the listed bulk-identification and fibre-counting procedures.
Aerem has in-house Phenom XL SEM/EDS capability, but SEM/EDS is not listed on the linked IANZ asbestos scope.
Soil analysis is excluded from the linked IANZ PLM scope. The method, reporting basis and accreditation status must be stated separately.
Surveys, air monitoring, clearance inspections and occupational hygiene services are governed by the relevant licences, competence requirements, procedures and project scope — not by the laboratory scope alone.
Aerem's Telarc certifications cover the published management-system scope for environmental consultancy and testing activities.
Provision of environmental consultancy and testing for asbestos, asbestos surveys, asbestos clearances, asbestos laboratory analysis, mould and soil consultancy/analysis.
Quality management, customer requirements, controlled processes and continual improvement.
Environmental responsibilities, impacts, controls, objectives and continual improvement.
Occupational health and safety risk management, worker participation and safe systems of work.
These policy links form part of the 30 August 2026 document snapshot. Where a contract requires a controlled copy, request the current approved version from Aerem.
Competence, impartiality, confidentiality, customer focus and continual improvement.
Open PDF → Published public policyEnvironmental protection, responsible resource use, compliance and measurable improvement.
Open PDF → Published public policySafe work, consultation, risk control, worker participation and continual improvement.
Open PDF →A certificate supports confidence in a system. It does not replace job-specific evidence.
Client, site, sample or monitoring reference, dates and chain-of-custody information.
The analytical or assessment method used and whether that specific activity is accredited.
Clear terminology, the decision rule, reporting limits where relevant, and the basis for any conclusion.
What the work does not establish, inaccessible areas, sample constraints and uncertainty.
The competent analyst, assessor or authorised signatory responsible for the issued document.
No. It covers only the activities listed in Aerem's IANZ scope. The linked schedule dated 16 March 2026 includes specified PLM bulk identification, PCM air-filter fibre counting and listed mobile-laboratory operations.
SEM/EDS is an advanced in-house capability, but it is not listed on the linked IANZ asbestos scope. Quotations and reports should state the method and accreditation status for the particular work.
They certify Aerem's management systems for quality, environmental management and occupational health and safety within the published certification scope. They do not make every individual test an accredited laboratory test.
Check the report's accreditation statement, method, scope, signatory and any exclusions. If the accreditation status is unclear, contact Aerem before relying on the result for a regulatory or contractual decision.
Ask Aerem to identify the method, accreditation status and limitations in the quotation before work begins.