requests@aerem.co.nz0800 569 590Existing job or report?
Find your service

What do you need help with?

Search by problem, material or service to find the right expertise and prepare an enquiry.

Help me choose →

Know the scope before you book. Agree the method, deliverables and timing for your project. Check which activities are accredited →

14 services

Available services

LAB 01

Asbestos bulk identification

Qualitative identification of asbestos in suitable bulk materials using polarised light microscopy.

When to use it and what to expect
When to use it
You need to identify whether a suitable bulk material contains asbestos.
Agree the outputs
Confirm the sample type, analytical method, report and applicable accreditation scope. Soil is a separate service.
To get started
Describe the material and number of samples before arranging collection or delivery.
LAB 02

Fibre counting analysis

PCM analysis of membrane filters collected for asbestos air-monitoring programmes.

When to use it and what to expect
When to use it
An asbestos air-monitoring programme requires analysis of membrane filters.
Agree the outputs
Confirm the counting method, sample information and reporting requirements. A real-time dust reading is not a fibre count.
To get started
Share the monitoring context and ask about filter and chain-of-custody requirements.
LAB 03

Mobile laboratory services

On-site bulk identification and fibre-counting capability for the activities listed on the current IANZ schedule.

When to use it and what to expect
When to use it
A project needs laboratory capability closer to the site.
Agree the outputs
Confirm the activities, facility listing, site requirements and reporting arrangements for the proposed work.
To get started
Share the site, planned activities, expected sample numbers and timing.
LAB 04

Asbestos soil analysis

Specialist soil assessment and analysis. This service sits outside the current IANZ schedule and must be scoped separately.

When to use it and what to expect
When to use it
You need to investigate possible asbestos in soil or contaminated land.
Agree the outputs
Agree the assessment, sampling and analysis scope separately. This service is outside the current IANZ schedule shown here.
To get started
Describe the site history, material and decision the results need to support.
ASB 01

Asbestos surveys

Management, refurbishment, demolition and targeted survey scopes matched to the planned work.

When to use it and what to expect
When to use it
You are managing a building or planning refurbishment, renovation or demolition.
Agree the outputs
Agree the survey type, areas, access limitations and report or register needed for the planned work.
To get started
Share the address, building information, planned work and any existing asbestos records.
ASB 02

Asbestos management plans

Practical registers and plans identifying known or presumed asbestos-containing materials, controls, responsibilities and review actions.

When to use it and what to expect
When to use it
You need a practical approach to managing known or presumed asbestos-containing materials.
Agree the outputs
Confirm the register, responsibilities, controls and review actions to be included.
To get started
Have the existing survey, register and intended use of the property ready.
ASB 03

Licensed assessor services

Independent air monitoring, clearance inspection and certification for the agreed removal scope.

When to use it and what to expect
When to use it
Asbestos removal work needs independent air monitoring or clearance assessment.
Agree the outputs
Agree the monitoring programme, inspection stages and certification required for the removal scope.
To get started
Share the removal plan, site, programme and relevant survey information.
OH 03

Real-time dust monitoring

Track changes in airborne particulate levels during dust-generating work and assess site conditions and controls.

When to use it and what to expect
When to use it
You need baseline information, checks during dusty work or monitoring around boundaries and transit routes.
Agree the outputs
Agree locations, monitoring periods, interpretation and reporting. Particulate readings do not identify asbestos or silica.
To get started
Describe the work, site layout, nearby receptors, timing and controls you want to check.
OH 01

Silica assessments

Personal and task-based monitoring to assess exposure to respirable crystalline silica and the effectiveness of controls.

When to use it and what to expect
When to use it
Work may expose people to respirable crystalline silica.
Agree the outputs
Agree representative personal or task-based monitoring, analysis and how findings will inform control advice.
To get started
Describe materials, tasks, work patterns and existing controls.
OH 02

Noise testing and monitoring

Assessments of personal noise exposure, area noise levels, noise sources and environmental noise, with practical recommendations.

When to use it and what to expect
When to use it
You need to understand workplace noise exposure or an environmental noise concern.
Agree the outputs
Agree personal or area monitoring, relevant locations and the assessment and recommendations required.
To get started
Describe the source, affected people or locations, working hours and concern.
BLD 01

Indoor air quality assessments

Targeted assessment of ventilation, particles, comfort conditions and suspected indoor sources.

When to use it and what to expect
When to use it
A building has ventilation, particle, comfort or suspected indoor-source concerns.
Agree the outputs
Agree the questions, measurements and interpretation needed for the building and its use.
To get started
Share the symptoms or observations, affected areas, occupancy and any previous findings.
BLD 02

Mould assessments

Visual inspection, assessment of moisture conditions and targeted sampling where it provides useful evidence.

When to use it and what to expect
When to use it
You have visible mould, a dampness concern or a history of water damage.
Agree the outputs
Agree the inspection, moisture assessment and whether targeted sampling would provide useful evidence.
To get started
Share the affected locations, observations, water-damage history and available photographs.
BLD 03

Moisture assessments

Independent inspection and moisture measurement to identify dampness, leaks and water ingress.

When to use it and what to expect
When to use it
You need to investigate dampness, a leak or possible water ingress.
Agree the outputs
Agree the inspection areas, moisture measurements and reporting needed to understand the concern.
To get started
Describe when and where the issue appears and any previous repairs or findings.
SEM 01

SEM/EDS analysis

High-resolution imaging and targeted elemental analysis for fibres, particles, minerals and material investigations.

When to use it and what to expect
When to use it
You have a detailed fibre, particle, mineral or material question that needs advanced microscopy.
Agree the outputs
Agree the imaging, targeted elemental analysis and reporting limits. Confirm accreditation status for the specific activity.
To get started
Describe the material, sample origin and the question you want the analysis to answer.

Accreditation is specific to the activity and facility. Check the scope before commissioning work. Links to full service details open the existing Aerem website in a new tab.

Real-time dust monitoring

Understand changing dust levels.

Plan particulate monitoring around your site and the work taking place, from baseline checks to live dust-generating tasks.

Useful for demolition, construction and asbestos-related work where dust trends can help assess conditions and the effectiveness of controls.

01

Establish a baseline

Understand particulate conditions before the planned work starts.

02

Check dusty tasks

Follow changes while dust-generating activities are taking place.

03

Monitor site routes

Scope checks around boundaries, transit routes and nearby receptors.

04

Assess controls

Use dust trends alongside site observations to help check control performance.

Dust readings are not asbestos or silica identification.

Real-time particulate monitoring does not replace asbestos fibre monitoring, laboratory analysis, personal exposure assessment or clearance. Agree the monitoring method, locations, periods and reporting before work starts.

Four connected capabilities

Connected expertise. Fewer handovers.

Each discipline can stand alone. Where a project crosses disciplines, Aerem can coordinate the people who inspect, sample, analyse and interpret the evidence.

Aerem mobile asbestos testing laboratory at an industrial siteIANZ Accreditation No. 1447
Aerem asbestos surveyor collecting a material sample in a fire-damaged room while wearing respiratory protection and protective coverallsSurvey, sampling & assessment
Aerem field monitoring equipment used for occupational and environmental assessmentWorker and building health
Aerem analyst examining a sample with a Phenom scanning electron microscopeIn-house Phenom XL SEM/EDS
04 · Advanced microscopy

See what ordinary microscopy can miss

High-magnification electron imaging and targeted elemental analysis for fibres, particles, dusts, deposits, aggregates, coatings and material failures.

Scope clarity: SEM/EDS capability is described separately from Aerem’s current IANZ-accredited asbestos laboratory schedule unless a specific activity is expressly listed.
Not sure where to start?

Tell us what you need.

A site, a sample or a question. Start with what you know.